High Purity Equipment
Showing 31–45 of 46 results
-
High Purity Equipment, Axxair Orbital Welding
Axxair Orbital Fusion Closed Welding Heads
- Water Cooled
- Stainless Steel Collets
- Perfect for Thin Wall Tubing
Axxair Orbital Fusion Closed Welding Heads are designed for closed-chamber weld head orbital TIG welding. These weld end-to-end pipe, elbow joints, pipe ferrules, T-joints and SMS connectors in a fully sealed inert environment.
- SATF-40NDHX .025” to 1 1/2” Ø tube range, inline
- SATF-65NDHX .025” to 2 1/2” Ø tube range, inline
- SATF-115NDHX 1” to 4 1/2” Ø tube range, inline
SKU: n/a -
High Purity Equipment, Tube Cutting & Facing, Axxair Orbital Welding
Axxair SAXX 200 Orbital Inverter Power Supply
- Now only available on the Metron Hire Fleet, replaced by SAXX-201
- SAXX-200 Orbital TIG Power Source for Orbital Fusion Welding Heads
- 7.5″ Color Touch Screen Interface
- 110V to 230V
This Axxair Orbital Inverter power supply features a 7.5″ color touch screen and auto-calculated program settings based on diameter, thickness, configuration and material.
-
- 200A maximum current, 120A 100% (230V)
- 140A maximum current, 100A 100% (110V)
- Auto line, 110V to 230V +/- 15% (mono – 50/60hz)
- 7.5″ color touch screen interface
- Auto calculation for program setting through diameter, thickness, configuration and material
- Programs from 1 to 20 levels
- Step modes advance speed-wire pulse
- Dual gas control: purge gas (through purge time, as well as electrode gas, through pre-gas, or ppm
levels)
- Compatible with oxygen measuring systems
- USB program storage: 200 programs per stick
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® Aluminium Plugs
Suitable for Weld Purging too
01W-PipestoppersAluminiumPlugs
Huntingdon Fusion Techniques manufacture and supply HFT Pipestoppers® Aluminium Test Plugs and Stoppers to complement the HFT Pipestoppers® range of Nylon Expanding Drain Test Plugs and Stoppers.
The HFT Pipestoppers® range of Aluminium Test Plugs and Stoppers are heavy duty, high temperature resistant and suitable for arduous duties such as immersion in chemicals
The HFT Pipestoppers® range of Aluminium Test Plugs can be used for leak testing, isolation, sealing, stopping and purging pipework in ducting and conduit, swimming pools, masking in painting and casting industries.
A variety of rubber sealing rings are available including natural rubber, silicone, nitrile, neoprene, viton and a friction free washer to ease tightening of the wing nut is a standard feature.
HFT Pipestoppers® Aluminium Test Plugs and Stoppers are available for entries and exits from 1.5″ to 36″ (38 to 900 mm).
All Plugs conform to British Standards BS8005 and BS EN752-4 for low pressure testing and sealing of pipes.
These HFT Pipestoppers® Aluminium Test Plugs and Stoppers can be used as Drain Test Plugs, Sewerage Test Plugs, Waste Test Plugs, Scupper Plugs, Plumbing, Welding Purge Plugs and many more applications.
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® Cylindrical & Spherical Inflatable Stoppers
Where Access to the Job Site is Difficult
Huntingdon Fusion Techniques HFT® manufactures a range of Inflatable Stoppers for pipes and ducts as a quick and easy way to stop the flow of gas or liquid, to stop the build up of debris and to prevent ingress of unwanted material or animals.
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® Inflatable Low Profile Stoppers
Low Cost where Access is Tight
For applications where insufficient length of pipe is available for the regular Cylindrical and Spherical Stoppers, this new style designated ‘HFT Pipestoppers® Low Profile Stoppers’ because of their low profile can fit into a pipe end that may be directly on an elbow or maybe just inside a flanged neck on a casting or other fabrication.
The Stopper is a secure method of blocking pipe ends to keep gases inside or to keep debris and vermin out.
When used in a vertical mode, they are ideal to prevent machining swarf or tools from falling into pipes or orifices into unrecoverable situations.
These stoppers are available in sizes from 6 – 96” (150 – 2,440 mm).
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® Inflatable Rubber Pipe Plugs and Stoppers
Lightweight… but Strong and Highly Resistant Plugs
HFT® Pipestoppers® Inflatable Rubber Pipe Plugs and Stoppers are made of a thicker, stronger, special rubber and have a large range of diameters. These Plugs are an addition to the existing range of inflatable, aluminium, nylon and steel plugs and stoppers. The special rubber is very resistant to higher pressure and petrochemical fluids and vapours.
These Rubber Inflatable Plugs take only seconds to inflate and are ideal for fast, reliable and safe stopping and blocking of pipes, joints, channels, inlets and a number of other uses.
These lightweight, easy to remove Rubber Inflatable Plugs are resistant from -40° to 70°C and highly resistant to oils, hydrocarbons and petrochemicals.
Tough, durable, with a long life, they have quick disconnect fittings and can be used temporarily or for long term use. Each plug covers a range of sizes from 35 mm to 2000 mm (1.5″ to 78″) in diameter.
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® Nylon Plugs
An Easy, Simple, Positive Seal!
HFT Pipestoppers® Nylon Plugs are suitable for a myriad of applications. They are mostly used for leak testing of pipework fabrications, or simply to prevent the ingress of dirt, vermin or other unwanted material. However, there are over 100 different applications for these plugs.
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® PetroChem® Chemical Resistant Pipe Stoppers
Stop Hydrocarbon Liquids and Gases Escaping
12W Pipestoppers Heat Resistant Covers Inflatable Stoppers
Standard PetroChem® Inflatable Stoppers are available in Spherical and Cylindrical formats.
Cylindrical PetroChem® Inflatable Stoppers are commonly used for stopping off pipes with hydrocarbon gases and liquids inside where the inner membrane of the stopper protects the inflatable latex bag inside that.
Spherical PetroChem® Inflatable Stoppers give less contact area than the Cylindrical version, but are very useful where access is limited. Since the position of the Stopper in the pipe is not critical, it can be put at any angle, this is particularly useful when inserting into a small opening at the top of a pipe rather than at the end of the pipe.
Heat Resistant Covers
Heat Resistant Inflatable Covers are available with a performance rating to give protection up to a temperature of 300°C (572°F)..
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® Steel PlugFast™ Pipe Plugs and Stoppers
For Fast, Effective Sealing
HFT Pipestoppers PlugFast™ Peripheral Sealing Pipe Plugs
PlugFast™ Peripheral Sealing Plugs are manufactured in a number of different diameters, including sizes not covered by the Pipestoppers® range of Aluminium Plugs from 17 to 96” Ø (432 to 2400 mm). They are manufactured both as a single port series and a double port option.
SKU: n/a -
High Purity Equipment
HFT Pipestoppers® Steel Plugs and Stoppers Singles and Doubles
Leak Testing, Isolation, Sealing and Stopping
01W-PipestoppersSteelPlugs
HFT Pipestoppers® Steel Test Plugs can be used for low pressure testing and plugging all pipes, pipelines and pipe work fabrications and any other orifices between 2 to 48″ (50 to 1200 mm) diameter.
These HFT Pipestoppers® Steel Drain Test Plugs are specifically designed for heavier duty applications such as long immersion in water, for use at higher temperatures or for contact with acidic or alkaline environments for which the nylon, aluminium and inflatable plugs are unsuitable.
Low cost expanding HFT Pipestoppers® Steel Testing Plugs and Stoppers range for sizes up to 48″ (1200 mm) diameter.
The standard seals are made from natural rubber. Synthetic rubber seals (for example for petrochemical applications) are also available.
Options are:
• Silicone
• Nitrile
• Neoprene
• VitonHFT Pipestoppers® Steel Test Plugs and Stoppers are available as single plugs as well as double versions for greater sealing capacity and stability inside pipes.
Standard sizes of HFT Pipestoppers® Steel Test Plugs and Stoppers are available for immediate delivery.
All Plugs conform to Quality Standards BS8005 and BS EN752-4 for low pressure testing and sealing of pipes.
SKU: n/a -
High Purity Equipment, Tube Severing
MODEL 572AC SEVERMASTER
Tube Severing Machine
The Model 572AC SEVERMASTER™ severs .25” to 2″ (6.4 to 50.8mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes.
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-1AC Tube Squaring Module for optimum burr free ends.
SKU: n/a -
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.
SKU: n/a -
High Purity Equipment
PurgeGate® Valves
Plug and Play for Easy Control
PurgeGate, a unique one way valve with an easy push fit connection are suitable for all types of Inflatable Pipe Weld Purging Systems. These simple to use valves can be swopped from system to system making them highly affordable.
SKU: n/a -
High Purity Equipment
Qwik-Freezer™ Portable CO2 Pipe Freezing Equipment
Plug it by Freezing it….!
The HFT® Pipestoppers® Qwik-Freezer™ Pipe Freezing Equipment uses liquid carbon dioxide (CO2) to freeze stationary water in any chosen sections of pipe or tubing. By producing very low ‘dry ice’ temperatures, Qwik- Freezer™ forms a secure in-line ice plug.
This temporarily isolates the water in the system and allows repairs or modification to be made without draining or shutting off systems.
SKU: n/a -
High Purity Equipment
Techweld® Tungsten Electrode Grinders TEG-3
Long Life Diamond Grinding Wheels
Tungsten Electrode Grinder ‘Long Life’ Diamond Grinding Wheels for our ‘unique’ model TEG-3 continue to be available as replacements.
Huntingdon Fusion Techniques HFT® pioneered the use of Tungsten Electrode Grinding machines in the 1970’s because of our knowledge behind the science of the welding arc and the need for a consistently and correctly ground tungsten electrode.
Since then the market place has become saturated with a plethora of different machines and our machine design is no longer viable in the market place.
Due to the fact that the Techweld® Tungsten Electrode Grinders TEG-3 are unique to Huntingdon Fusion Techniques HFT®, the grinding wheels were specifically developed by HFT® to produce long lasting and long life results.
Therefore, we will continue to support the product with ongoing supply and availablity of Replacement ‘Long Life’ Diamond Grinding Wheels.
These Replacement ‘Long Life’ Diamond Grinding Wheels are available for immediate delivery and will always be available to all our customers via ourselves and our Worldwide Distributor Network.
SKU: n/a
-
High Purity Equipment, Axxair Orbital Welding
Axxair Orbital Fusion Closed Welding Heads
- Water Cooled
- Stainless Steel Collets
- Perfect for Thin Wall Tubing
Axxair Orbital Fusion Closed Welding Heads are designed for closed-chamber weld head orbital TIG welding. These weld end-to-end pipe, elbow joints, pipe ferrules, T-joints and SMS connectors in a fully sealed inert environment.
- SATF-40NDHX .025” to 1 1/2” Ø tube range, inline
- SATF-65NDHX .025” to 2 1/2” Ø tube range, inline
- SATF-115NDHX 1” to 4 1/2” Ø tube range, inline
-
High Purity Equipment, Tube Cutting & Facing, Axxair Orbital Welding
Axxair SAXX 200 Orbital Inverter Power Supply
- Now only available on the Metron Hire Fleet, replaced by SAXX-201
- SAXX-200 Orbital TIG Power Source for Orbital Fusion Welding Heads
- 7.5″ Color Touch Screen Interface
- 110V to 230V
This Axxair Orbital Inverter power supply features a 7.5″ color touch screen and auto-calculated program settings based on diameter, thickness, configuration and material.
-
- 200A maximum current, 120A 100% (230V)
- 140A maximum current, 100A 100% (110V)
- Auto line, 110V to 230V +/- 15% (mono – 50/60hz)
- 7.5″ color touch screen interface
- Auto calculation for program setting through diameter, thickness, configuration and material
- Programs from 1 to 20 levels
- Step modes advance speed-wire pulse
- Dual gas control: purge gas (through purge time, as well as electrode gas, through pre-gas, or ppm
levels)
- Compatible with oxygen measuring systems
- USB program storage: 200 programs per stick
-
High Purity Equipment
HFT Pipestoppers® Aluminium Plugs
Suitable for Weld Purging too
01W-PipestoppersAluminiumPlugs
Huntingdon Fusion Techniques manufacture and supply HFT Pipestoppers® Aluminium Test Plugs and Stoppers to complement the HFT Pipestoppers® range of Nylon Expanding Drain Test Plugs and Stoppers.
The HFT Pipestoppers® range of Aluminium Test Plugs and Stoppers are heavy duty, high temperature resistant and suitable for arduous duties such as immersion in chemicals
The HFT Pipestoppers® range of Aluminium Test Plugs can be used for leak testing, isolation, sealing, stopping and purging pipework in ducting and conduit, swimming pools, masking in painting and casting industries.
A variety of rubber sealing rings are available including natural rubber, silicone, nitrile, neoprene, viton and a friction free washer to ease tightening of the wing nut is a standard feature.
HFT Pipestoppers® Aluminium Test Plugs and Stoppers are available for entries and exits from 1.5″ to 36″ (38 to 900 mm).
All Plugs conform to British Standards BS8005 and BS EN752-4 for low pressure testing and sealing of pipes.
These HFT Pipestoppers® Aluminium Test Plugs and Stoppers can be used as Drain Test Plugs, Sewerage Test Plugs, Waste Test Plugs, Scupper Plugs, Plumbing, Welding Purge Plugs and many more applications.
-
High Purity Equipment
HFT Pipestoppers® Cylindrical & Spherical Inflatable Stoppers
Where Access to the Job Site is Difficult
Huntingdon Fusion Techniques HFT® manufactures a range of Inflatable Stoppers for pipes and ducts as a quick and easy way to stop the flow of gas or liquid, to stop the build up of debris and to prevent ingress of unwanted material or animals.
-
High Purity Equipment
HFT Pipestoppers® Inflatable Low Profile Stoppers
Low Cost where Access is Tight
For applications where insufficient length of pipe is available for the regular Cylindrical and Spherical Stoppers, this new style designated ‘HFT Pipestoppers® Low Profile Stoppers’ because of their low profile can fit into a pipe end that may be directly on an elbow or maybe just inside a flanged neck on a casting or other fabrication.
The Stopper is a secure method of blocking pipe ends to keep gases inside or to keep debris and vermin out.
When used in a vertical mode, they are ideal to prevent machining swarf or tools from falling into pipes or orifices into unrecoverable situations.
These stoppers are available in sizes from 6 – 96” (150 – 2,440 mm).
-
High Purity Equipment
HFT Pipestoppers® Inflatable Rubber Pipe Plugs and Stoppers
Lightweight… but Strong and Highly Resistant Plugs
HFT® Pipestoppers® Inflatable Rubber Pipe Plugs and Stoppers are made of a thicker, stronger, special rubber and have a large range of diameters. These Plugs are an addition to the existing range of inflatable, aluminium, nylon and steel plugs and stoppers. The special rubber is very resistant to higher pressure and petrochemical fluids and vapours.
These Rubber Inflatable Plugs take only seconds to inflate and are ideal for fast, reliable and safe stopping and blocking of pipes, joints, channels, inlets and a number of other uses.
These lightweight, easy to remove Rubber Inflatable Plugs are resistant from -40° to 70°C and highly resistant to oils, hydrocarbons and petrochemicals.
Tough, durable, with a long life, they have quick disconnect fittings and can be used temporarily or for long term use. Each plug covers a range of sizes from 35 mm to 2000 mm (1.5″ to 78″) in diameter.
-
High Purity Equipment
HFT Pipestoppers® Nylon Plugs
An Easy, Simple, Positive Seal!
HFT Pipestoppers® Nylon Plugs are suitable for a myriad of applications. They are mostly used for leak testing of pipework fabrications, or simply to prevent the ingress of dirt, vermin or other unwanted material. However, there are over 100 different applications for these plugs.
-
High Purity Equipment
HFT Pipestoppers® PetroChem® Chemical Resistant Pipe Stoppers
Stop Hydrocarbon Liquids and Gases Escaping
12W Pipestoppers Heat Resistant Covers Inflatable Stoppers
Standard PetroChem® Inflatable Stoppers are available in Spherical and Cylindrical formats.
Cylindrical PetroChem® Inflatable Stoppers are commonly used for stopping off pipes with hydrocarbon gases and liquids inside where the inner membrane of the stopper protects the inflatable latex bag inside that.
Spherical PetroChem® Inflatable Stoppers give less contact area than the Cylindrical version, but are very useful where access is limited. Since the position of the Stopper in the pipe is not critical, it can be put at any angle, this is particularly useful when inserting into a small opening at the top of a pipe rather than at the end of the pipe.
Heat Resistant Covers
Heat Resistant Inflatable Covers are available with a performance rating to give protection up to a temperature of 300°C (572°F)..
-
High Purity Equipment
HFT Pipestoppers® Steel PlugFast™ Pipe Plugs and Stoppers
For Fast, Effective Sealing
HFT Pipestoppers PlugFast™ Peripheral Sealing Pipe Plugs
PlugFast™ Peripheral Sealing Plugs are manufactured in a number of different diameters, including sizes not covered by the Pipestoppers® range of Aluminium Plugs from 17 to 96” Ø (432 to 2400 mm). They are manufactured both as a single port series and a double port option.
-
High Purity Equipment
HFT Pipestoppers® Steel Plugs and Stoppers Singles and Doubles
Leak Testing, Isolation, Sealing and Stopping
01W-PipestoppersSteelPlugs
HFT Pipestoppers® Steel Test Plugs can be used for low pressure testing and plugging all pipes, pipelines and pipe work fabrications and any other orifices between 2 to 48″ (50 to 1200 mm) diameter.
These HFT Pipestoppers® Steel Drain Test Plugs are specifically designed for heavier duty applications such as long immersion in water, for use at higher temperatures or for contact with acidic or alkaline environments for which the nylon, aluminium and inflatable plugs are unsuitable.
Low cost expanding HFT Pipestoppers® Steel Testing Plugs and Stoppers range for sizes up to 48″ (1200 mm) diameter.
The standard seals are made from natural rubber. Synthetic rubber seals (for example for petrochemical applications) are also available.
Options are:
• Silicone
• Nitrile
• Neoprene
• VitonHFT Pipestoppers® Steel Test Plugs and Stoppers are available as single plugs as well as double versions for greater sealing capacity and stability inside pipes.
Standard sizes of HFT Pipestoppers® Steel Test Plugs and Stoppers are available for immediate delivery.
All Plugs conform to Quality Standards BS8005 and BS EN752-4 for low pressure testing and sealing of pipes.
-
High Purity Equipment, Tube Severing
MODEL 572AC SEVERMASTER
Tube Severing Machine
The Model 572AC SEVERMASTER™ severs .25” to 2″ (6.4 to 50.8mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes.
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-1AC Tube Squaring Module for optimum burr free ends.
-
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.
-
High Purity Equipment
Qwik-Freezer™ Portable CO2 Pipe Freezing Equipment
Plug it by Freezing it….!
The HFT® Pipestoppers® Qwik-Freezer™ Pipe Freezing Equipment uses liquid carbon dioxide (CO2) to freeze stationary water in any chosen sections of pipe or tubing. By producing very low ‘dry ice’ temperatures, Qwik- Freezer™ forms a secure in-line ice plug.
This temporarily isolates the water in the system and allows repairs or modification to be made without draining or shutting off systems.
-
High Purity Equipment
Techweld® Tungsten Electrode Grinders TEG-3
Long Life Diamond Grinding Wheels
Tungsten Electrode Grinder ‘Long Life’ Diamond Grinding Wheels for our ‘unique’ model TEG-3 continue to be available as replacements.
Huntingdon Fusion Techniques HFT® pioneered the use of Tungsten Electrode Grinding machines in the 1970’s because of our knowledge behind the science of the welding arc and the need for a consistently and correctly ground tungsten electrode.
Since then the market place has become saturated with a plethora of different machines and our machine design is no longer viable in the market place.
Due to the fact that the Techweld® Tungsten Electrode Grinders TEG-3 are unique to Huntingdon Fusion Techniques HFT®, the grinding wheels were specifically developed by HFT® to produce long lasting and long life results.
Therefore, we will continue to support the product with ongoing supply and availablity of Replacement ‘Long Life’ Diamond Grinding Wheels.
These Replacement ‘Long Life’ Diamond Grinding Wheels are available for immediate delivery and will always be available to all our customers via ourselves and our Worldwide Distributor Network.
-
High Purity Equipment, Axxair Orbital Welding
Axxair Orbital Fusion Closed Welding Heads
- Water Cooled
- Stainless Steel Collets
- Perfect for Thin Wall Tubing
Axxair Orbital Fusion Closed Welding Heads are designed for closed-chamber weld head orbital TIG welding. These weld end-to-end pipe, elbow joints, pipe ferrules, T-joints and SMS connectors in a fully sealed inert environment.
- SATF-40NDHX .025” to 1 1/2” Ø tube range, inline
- SATF-65NDHX .025” to 2 1/2” Ø tube range, inline
- SATF-115NDHX 1” to 4 1/2” Ø tube range, inline
-
High Purity Equipment, Tube Cutting & Facing, Axxair Orbital Welding
Axxair SAXX 200 Orbital Inverter Power Supply
- Now only available on the Metron Hire Fleet, replaced by SAXX-201
- SAXX-200 Orbital TIG Power Source for Orbital Fusion Welding Heads
- 7.5″ Color Touch Screen Interface
- 110V to 230V
This Axxair Orbital Inverter power supply features a 7.5″ color touch screen and auto-calculated program settings based on diameter, thickness, configuration and material.
-
- 200A maximum current, 120A 100% (230V)
- 140A maximum current, 100A 100% (110V)
- Auto line, 110V to 230V +/- 15% (mono – 50/60hz)
- 7.5″ color touch screen interface
- Auto calculation for program setting through diameter, thickness, configuration and material
- Programs from 1 to 20 levels
- Step modes advance speed-wire pulse
- Dual gas control: purge gas (through purge time, as well as electrode gas, through pre-gas, or ppm
levels)
- Compatible with oxygen measuring systems
- USB program storage: 200 programs per stick
-
High Purity Equipment
HFT Pipestoppers® Aluminium Plugs
Suitable for Weld Purging too
01W-PipestoppersAluminiumPlugs
Huntingdon Fusion Techniques manufacture and supply HFT Pipestoppers® Aluminium Test Plugs and Stoppers to complement the HFT Pipestoppers® range of Nylon Expanding Drain Test Plugs and Stoppers.
The HFT Pipestoppers® range of Aluminium Test Plugs and Stoppers are heavy duty, high temperature resistant and suitable for arduous duties such as immersion in chemicals
The HFT Pipestoppers® range of Aluminium Test Plugs can be used for leak testing, isolation, sealing, stopping and purging pipework in ducting and conduit, swimming pools, masking in painting and casting industries.
A variety of rubber sealing rings are available including natural rubber, silicone, nitrile, neoprene, viton and a friction free washer to ease tightening of the wing nut is a standard feature.
HFT Pipestoppers® Aluminium Test Plugs and Stoppers are available for entries and exits from 1.5″ to 36″ (38 to 900 mm).
All Plugs conform to British Standards BS8005 and BS EN752-4 for low pressure testing and sealing of pipes.
These HFT Pipestoppers® Aluminium Test Plugs and Stoppers can be used as Drain Test Plugs, Sewerage Test Plugs, Waste Test Plugs, Scupper Plugs, Plumbing, Welding Purge Plugs and many more applications.
-
High Purity Equipment
HFT Pipestoppers® Cylindrical & Spherical Inflatable Stoppers
Where Access to the Job Site is Difficult
Huntingdon Fusion Techniques HFT® manufactures a range of Inflatable Stoppers for pipes and ducts as a quick and easy way to stop the flow of gas or liquid, to stop the build up of debris and to prevent ingress of unwanted material or animals.
-
High Purity Equipment
HFT Pipestoppers® Inflatable Low Profile Stoppers
Low Cost where Access is Tight
For applications where insufficient length of pipe is available for the regular Cylindrical and Spherical Stoppers, this new style designated ‘HFT Pipestoppers® Low Profile Stoppers’ because of their low profile can fit into a pipe end that may be directly on an elbow or maybe just inside a flanged neck on a casting or other fabrication.
The Stopper is a secure method of blocking pipe ends to keep gases inside or to keep debris and vermin out.
When used in a vertical mode, they are ideal to prevent machining swarf or tools from falling into pipes or orifices into unrecoverable situations.
These stoppers are available in sizes from 6 – 96” (150 – 2,440 mm).
-
High Purity Equipment
HFT Pipestoppers® Inflatable Rubber Pipe Plugs and Stoppers
Lightweight… but Strong and Highly Resistant Plugs
HFT® Pipestoppers® Inflatable Rubber Pipe Plugs and Stoppers are made of a thicker, stronger, special rubber and have a large range of diameters. These Plugs are an addition to the existing range of inflatable, aluminium, nylon and steel plugs and stoppers. The special rubber is very resistant to higher pressure and petrochemical fluids and vapours.
These Rubber Inflatable Plugs take only seconds to inflate and are ideal for fast, reliable and safe stopping and blocking of pipes, joints, channels, inlets and a number of other uses.
These lightweight, easy to remove Rubber Inflatable Plugs are resistant from -40° to 70°C and highly resistant to oils, hydrocarbons and petrochemicals.
Tough, durable, with a long life, they have quick disconnect fittings and can be used temporarily or for long term use. Each plug covers a range of sizes from 35 mm to 2000 mm (1.5″ to 78″) in diameter.
-
High Purity Equipment
HFT Pipestoppers® Nylon Plugs
An Easy, Simple, Positive Seal!
HFT Pipestoppers® Nylon Plugs are suitable for a myriad of applications. They are mostly used for leak testing of pipework fabrications, or simply to prevent the ingress of dirt, vermin or other unwanted material. However, there are over 100 different applications for these plugs.
-
High Purity Equipment
HFT Pipestoppers® PetroChem® Chemical Resistant Pipe Stoppers
Stop Hydrocarbon Liquids and Gases Escaping
12W Pipestoppers Heat Resistant Covers Inflatable Stoppers
Standard PetroChem® Inflatable Stoppers are available in Spherical and Cylindrical formats.
Cylindrical PetroChem® Inflatable Stoppers are commonly used for stopping off pipes with hydrocarbon gases and liquids inside where the inner membrane of the stopper protects the inflatable latex bag inside that.
Spherical PetroChem® Inflatable Stoppers give less contact area than the Cylindrical version, but are very useful where access is limited. Since the position of the Stopper in the pipe is not critical, it can be put at any angle, this is particularly useful when inserting into a small opening at the top of a pipe rather than at the end of the pipe.
Heat Resistant Covers
Heat Resistant Inflatable Covers are available with a performance rating to give protection up to a temperature of 300°C (572°F)..
-
High Purity Equipment
HFT Pipestoppers® Steel PlugFast™ Pipe Plugs and Stoppers
For Fast, Effective Sealing
HFT Pipestoppers PlugFast™ Peripheral Sealing Pipe Plugs
PlugFast™ Peripheral Sealing Plugs are manufactured in a number of different diameters, including sizes not covered by the Pipestoppers® range of Aluminium Plugs from 17 to 96” Ø (432 to 2400 mm). They are manufactured both as a single port series and a double port option.
-
High Purity Equipment
HFT Pipestoppers® Steel Plugs and Stoppers Singles and Doubles
Leak Testing, Isolation, Sealing and Stopping
01W-PipestoppersSteelPlugs
HFT Pipestoppers® Steel Test Plugs can be used for low pressure testing and plugging all pipes, pipelines and pipe work fabrications and any other orifices between 2 to 48″ (50 to 1200 mm) diameter.
These HFT Pipestoppers® Steel Drain Test Plugs are specifically designed for heavier duty applications such as long immersion in water, for use at higher temperatures or for contact with acidic or alkaline environments for which the nylon, aluminium and inflatable plugs are unsuitable.
Low cost expanding HFT Pipestoppers® Steel Testing Plugs and Stoppers range for sizes up to 48″ (1200 mm) diameter.
The standard seals are made from natural rubber. Synthetic rubber seals (for example for petrochemical applications) are also available.
Options are:
• Silicone
• Nitrile
• Neoprene
• VitonHFT Pipestoppers® Steel Test Plugs and Stoppers are available as single plugs as well as double versions for greater sealing capacity and stability inside pipes.
Standard sizes of HFT Pipestoppers® Steel Test Plugs and Stoppers are available for immediate delivery.
All Plugs conform to Quality Standards BS8005 and BS EN752-4 for low pressure testing and sealing of pipes.
-
High Purity Equipment, Tube Severing
MODEL 572AC SEVERMASTER
Tube Severing Machine
The Model 572AC SEVERMASTER™ severs .25” to 2″ (6.4 to 50.8mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes.
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-1AC Tube Squaring Module for optimum burr free ends.
-
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.
-
High Purity Equipment
Qwik-Freezer™ Portable CO2 Pipe Freezing Equipment
Plug it by Freezing it….!
The HFT® Pipestoppers® Qwik-Freezer™ Pipe Freezing Equipment uses liquid carbon dioxide (CO2) to freeze stationary water in any chosen sections of pipe or tubing. By producing very low ‘dry ice’ temperatures, Qwik- Freezer™ forms a secure in-line ice plug.
This temporarily isolates the water in the system and allows repairs or modification to be made without draining or shutting off systems.
-
High Purity Equipment
Techweld® Tungsten Electrode Grinders TEG-3
Long Life Diamond Grinding Wheels
Tungsten Electrode Grinder ‘Long Life’ Diamond Grinding Wheels for our ‘unique’ model TEG-3 continue to be available as replacements.
Huntingdon Fusion Techniques HFT® pioneered the use of Tungsten Electrode Grinding machines in the 1970’s because of our knowledge behind the science of the welding arc and the need for a consistently and correctly ground tungsten electrode.
Since then the market place has become saturated with a plethora of different machines and our machine design is no longer viable in the market place.
Due to the fact that the Techweld® Tungsten Electrode Grinders TEG-3 are unique to Huntingdon Fusion Techniques HFT®, the grinding wheels were specifically developed by HFT® to produce long lasting and long life results.
Therefore, we will continue to support the product with ongoing supply and availablity of Replacement ‘Long Life’ Diamond Grinding Wheels.
These Replacement ‘Long Life’ Diamond Grinding Wheels are available for immediate delivery and will always be available to all our customers via ourselves and our Worldwide Distributor Network.