Will Even Pass Through Small Pipes!
HFT Pipestoppers Inflatable Stoppers
The versatile Pipestoppers® Inflatable Stoppers can be inserted and retracted through small holes and then inflated to full size for stopping operations. They are used to service a wide variety of industrial applications and are available in the following ranges:
Standard Inflatable Stoppers:
Cylindrical Inflatable Stoppers
Spherical Inflatable Stoppers
The Standard Range of Inflatable Pipe Stoppers are available for immediate delivery with sizes ranging from 1 to 96″ (25 to 2440 mm).
Cylindrical Inflatable Stoppers will not invert (turn over) inside a pipe when under pressure, because they are longer than their diameter.
Spherical Stoppers are used where the position of the stopper is not important and they can be put at any angle and still make a seal.
12W Pipestoppers Heat Resistant Covers Inflatable StoppersChemical / Heat Resistant Inflatable Stoppers:
PetroChem Inflatable Stoppers
Heat Resistant Inflatable Stoppers
The PetroChem Inflatable Stoppers are identical in appearance and performance to the Standard Inflatable Stoppers, except that the inside inflatable latex part is enclosed in a thin, flexible rubber that is resistant to the petrochemical fluids and vapours.
Heat Resistant Inflatable Covers are available with a performance rating to give protection up to a temperature of 300°C (572°F).
HFT®’s Pipestoppers® most common applications are:
Debris stopping during machining operations
Leak testing of pipework systems in commercial, domestic and industrial applications
Low pressure hydrostatic tests
On-site thermoforming of bends in ducting and conduit materials
Fibre-optic construction projects
Debris and animal barriers for overnight protection of pipelines
Weld purging to isolate volumes in tanks, to minimise gas purging volumes
Be the first to review “HFT Pipestoppers® Cylindrical & Spherical Inflatable Stoppers”
You must be logged in to post a review.