The short and long sleeves in split leather are intended to protect arms from fine welding spatters.
PPE II° category
Certified by EU 425/2016
EN 11611 A1 Class 2
To order: W000404083
€17.70 Excluding VAT
The short and long sleeves in split leather are intended to protect arms from fine welding spatters.
PPE II° category
Certified by EU 425/2016
EN 11611 A1 Class 2
Technical description
◆ Entirely in split leather tanned with chromium salts (mineral substances).
◆ Fixed with leather straps.
◆ Tightening elastic to the wrists.
◆ Single size.
Protective limits
◆ Due to the presence of the securing straps the sleeves should not be worn when using machinery with moving or rotating
parts, without additional protection.
◆ The sleeves are not heat resistant and should not be exposed
either to convective or radiated heat sources.
◆ The sleeves are not meant for any other type of protection than the use described above. The manufacturer will not be held responsible for any damage that could occur from such
practices
Maintenance and storage
◆ Recommended storage: a safe dry well ventilated area that is not exposed to direct light.
◆ To clean use soap and water to a maximum temperature of 60 °C.
◆ Do not use any type of bleach, dry clean, (perchloride enthymeme) tumble driers or sharp and abrasive cleaning products.
◆ Maximum 30 wash cycles.
Length: +/- 400 m
You must be logged in to post a review.
There are no reviews yet.