,

Axxair SXMF MicroFit Orbital Head 3-17mm


The Microfitting Series has been designed to weld small diameters tubing and fittings mainly in the semiconductor industry.This head is a cassette system which allows firs to position the parts to be welded in the cassette that is a clamping feature. Once centred and positioned correctly, the welding head is slided in the cassette to correctly position the electrode to the surface to be welded. The cassette combinations are multiple depending on the type of parts to be welded, tube-tube,tube-union elbow, union elbow-union elbow for example.

The Microfitting Series has been designed to weld small diameters tubing and fittings mainly in the semiconductor industry.
This head is a cassette system which allows first to position the parts to be welded in the cassette that is a clamping feature.  Once centred and positioned correctly, the welding head is slided in the cassette to correctly position the electrode to the surface to be welded.
The cassette combinations are multiple depending on the type of parts to be welded, tube-tube, tube-union elbow, union elbow-union elbow for example.

Brand

Axxair

  • Maximum welding current for a duty cycle of 35%  70ampere
  • Maximum welding current for a duty cycle of 50%  55ampere
  • Maximum welding current 80ampere
  • Cable length: 5, 10 or 15 meters
  • Operating temperature: 32°F to 104°F (0°C to 40 °C)
  • Electrode Diameters 0.040mm to 1.0 mm
  • Weight (Excluding Cable) 0.6 kg

The cassettes offer multiple weld configurations and can be combined accordingly. Thus you will have complete cassettes such as our
tube-tube cassettes but for the other configurations of the cassettes will have to choosen as a kit of left Side plate and right side plate to
the central body. They have a special treatment that offer a very good conductivity and hard surface finish for durability.

AXXAIR has 3 types of sideplates :
Standard is used for tube clamping
Large for Fitting clamping
Thin to clamp tubes below 12.7 mm straight length .

You always need the central body in combination of one of the side plates depending on what you are clamping. The combinations are
multiple and the central body is mandatory in all combinations. You have to pay attention to have the clamping levers on the same side
(always use one left and one right except for fitting where it does not matter).
Attention: sideplates will have different collets.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Axxair SXMF MicroFit Orbital Head 3-17mm”

There are no reviews yet.