MIG Welding
Showing 31–45 of 52 results
-
MIG Welding, Mig Torches
Linc Gun LGS 150 G – K10429-15-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.6-1.0mm
SKU: n/a -
MIG Welding, Mig Torches
Linc Gun LGS 250 G – K10429-25-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-1.2mm
SKU: n/a -
Mig Torches, MIG Welding
Linc Gun LGS 360 G – K10429-36-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-1.6mm
SKU: n/a -
MIG Welding, Mig Torches
LINC GUN LGS 505 W – K10429-505-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-2.4mm
SKU: n/a -
MIG Welding, Mig Torches
LINC GUN LGS 505 W – K10429-505-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-ShieldedWire Diameter Range
0.8-2.4mm
SKU: n/a -
MIG Welding, Mig Machines, Lincoln Mig Welders
Lincoln FLEXTEC® 350X (STANDARD MODEL)
A RUGGED MULTI-PROCESS POWER SOURCE FOR MAXIMUM FLEXIBILITY
Out on the construction jobsite or in most fabrication shops, it pays to keep it simple. The Flextec 350X multi-process welder is designed for that kind of environment. These multi-process welders are easy to setup and easy to operate, yet rugged and flexible enough to be used in construction, fabrication, shipbuilding and other heavy-duty applications.
Simple
- Streamlined operator panel minimizes setup time
- Plug in to any 380-600V 3 phase power
- Easy process selection
Reliable
- Built on industry proven design elements of other popular Lincoln Electric welders
- Components designed to run cool for long life in high temperature environments
- Fully encapsulated and environmentally protected electronics
- Engineered for outdoor use and harsh environments (IP23 rated)
Flexible
- Compatible with across-the-arc, analog, digital or CrossLinc™ feeders
- Premium multi-process arc characteristics works with all DC wire, stick and TIG processes
- Choice of models to fit any application and budget
- Lightweight and portable
Product Highlights
- Desert Duty Rated™ for extreme temperatures up to 55°C
- VRD® Voltage Reduction Device reduces Open Circuit Voltage for added safety
- Offered in 4 and 6 pack rack configurations
- Wide 5-425 amperage range
- Capable of Arc Gouging with 3/16 in. (4.8 mm) carbons
CrossLinc™ Technology
- Full functionality without control cables
- Enables remote procedure setting at the feeder to improve weld quality
- Increase arc time with fewer trips to the power source to adjust settings
- Improves safety by reducing jobsite clutter
CROSSLINC™ TECHNOLOGY: SOLVING SITE WELDING ISSUES
Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.
‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is
not possible.The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.
There has to be a better way.
SKU: n/a -
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric LNM 316LSi Stainless Steel Mig Wire
Lincoln Electric LNM316Lsi Stainless Steel Mig Wire
• The higher Si level results in a smooth weld bead shape andeven appearance with excellent toe blending particularly infillet welds.
• The weld metal has a high resistance to pitting and crevice corrosion by non-oxidising acids.
• Used for applications with service temperatures <400°CSKU: n/a -
Mig Wires, MIG Welding, Mig Wire
Lincoln Electric LNM 304LSi Stainless Steel Mig Wire
AWS: ER308LSI
Top Features
- Solid wire with extra low carbon for welding austenitic CrNi-steels
- With increased silicon for improved wettability
Welding Positions
AllShielding Gas
- M11: Mixed gas Ar+ 0.5-5% CO2 + 0,5-5%H2
- M12: Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
SKU: n/a -
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric LNM307 Stainless Steel Mig Wire
AWS: ER307*
Top Features
- Solid wire for welding austenitic and ferritic stainless steels with difficult weldability
- Often used as a buffer layer for hardfacing applications
Typical Applications
- Buffer layer in hardfacing applications
Welding Positions
AllShielding Gas
- M12: Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
SKU: n/a -
Mig Wire, Mig Wires, MIG Welding
Lincoln Electric LNM 309LSI Stainless Mig Wire
AWS: ER 309LSI
Top Features
- Solid wire for welding stainless steel to carbon steel
- With high silicon for improved wettability
Typical Applications
- For welding stainless steel to carbon steel
Welding Positions
AllShielding Gas
- Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
SKU: n/a -
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric Outershield 71E-H FluxCored Mig Wire
Lincoln Electric Outersheild 71E-H FluxCored Mig Wire
- DualSheid Wire, FluxCored & Sheilding Gas
- Rutile flux cored wire for high quality welding with M21 gas
- Excellent operator appeal due to superior welding characteristics
- Superior product consistency with optimal alloy control
- H4 class in 1.6mm diameter
- Full out-of-position capability with high deposition rates
SKU: n/a -
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric Outershield 81Ni1 HSR FluxCored Mig Wire
Lincoln Electric Outersheild 81Ni1-HSR FluxCored Mig Wire
- All position gas shielded 1% Ni flux cored wire, offshore and similar applications
- Superior weldability, low spatter, good bead appearance
- Exceptional mechanical properties (CVN >47J at -50°C)
- Superior product consistency with optimal alloy control
- Specific design for stress relieved applications, guaranteed impact properties after PWHT
- Meets NACE MR-0175 requirements
SKU: n/a
-
MIG Welding, Mig Torches
Linc Gun LGS 150 G – K10429-15-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.6-1.0mm
-
MIG Welding, Mig Torches
Linc Gun LGS 250 G – K10429-25-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-1.2mm
-
Mig Torches, MIG Welding
Linc Gun LGS 360 G – K10429-36-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-1.6mm
-
MIG Welding, Mig Torches
LINC GUN LGS 505 W – K10429-505-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-2.4mm
-
MIG Welding, Mig Torches
LINC GUN LGS 505 W – K10429-505-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-ShieldedWire Diameter Range
0.8-2.4mm
-
MIG Welding, Mig Machines, Lincoln Mig Welders
Lincoln FLEXTEC® 350X (STANDARD MODEL)
A RUGGED MULTI-PROCESS POWER SOURCE FOR MAXIMUM FLEXIBILITY
Out on the construction jobsite or in most fabrication shops, it pays to keep it simple. The Flextec 350X multi-process welder is designed for that kind of environment. These multi-process welders are easy to setup and easy to operate, yet rugged and flexible enough to be used in construction, fabrication, shipbuilding and other heavy-duty applications.
Simple
- Streamlined operator panel minimizes setup time
- Plug in to any 380-600V 3 phase power
- Easy process selection
Reliable
- Built on industry proven design elements of other popular Lincoln Electric welders
- Components designed to run cool for long life in high temperature environments
- Fully encapsulated and environmentally protected electronics
- Engineered for outdoor use and harsh environments (IP23 rated)
Flexible
- Compatible with across-the-arc, analog, digital or CrossLinc™ feeders
- Premium multi-process arc characteristics works with all DC wire, stick and TIG processes
- Choice of models to fit any application and budget
- Lightweight and portable
Product Highlights
- Desert Duty Rated™ for extreme temperatures up to 55°C
- VRD® Voltage Reduction Device reduces Open Circuit Voltage for added safety
- Offered in 4 and 6 pack rack configurations
- Wide 5-425 amperage range
- Capable of Arc Gouging with 3/16 in. (4.8 mm) carbons
CrossLinc™ Technology
- Full functionality without control cables
- Enables remote procedure setting at the feeder to improve weld quality
- Increase arc time with fewer trips to the power source to adjust settings
- Improves safety by reducing jobsite clutter
CROSSLINC™ TECHNOLOGY: SOLVING SITE WELDING ISSUES
Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.
‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is
not possible.The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.
There has to be a better way.
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric LNM 316LSi Stainless Steel Mig Wire
Lincoln Electric LNM316Lsi Stainless Steel Mig Wire
• The higher Si level results in a smooth weld bead shape andeven appearance with excellent toe blending particularly infillet welds.
• The weld metal has a high resistance to pitting and crevice corrosion by non-oxidising acids.
• Used for applications with service temperatures <400°C -
Mig Wires, MIG Welding, Mig Wire
Lincoln Electric LNM 304LSi Stainless Steel Mig Wire
AWS: ER308LSI
Top Features
- Solid wire with extra low carbon for welding austenitic CrNi-steels
- With increased silicon for improved wettability
Welding Positions
AllShielding Gas
- M11: Mixed gas Ar+ 0.5-5% CO2 + 0,5-5%H2
- M12: Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric LNM307 Stainless Steel Mig Wire
AWS: ER307*
Top Features
- Solid wire for welding austenitic and ferritic stainless steels with difficult weldability
- Often used as a buffer layer for hardfacing applications
Typical Applications
- Buffer layer in hardfacing applications
Welding Positions
AllShielding Gas
- M12: Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
-
Mig Wire, Mig Wires, MIG Welding
Lincoln Electric LNM 309LSI Stainless Mig Wire
AWS: ER 309LSI
Top Features
- Solid wire for welding stainless steel to carbon steel
- With high silicon for improved wettability
Typical Applications
- For welding stainless steel to carbon steel
Welding Positions
AllShielding Gas
- Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric Outershield 71E-H FluxCored Mig Wire
Lincoln Electric Outersheild 71E-H FluxCored Mig Wire
- DualSheid Wire, FluxCored & Sheilding Gas
- Rutile flux cored wire for high quality welding with M21 gas
- Excellent operator appeal due to superior welding characteristics
- Superior product consistency with optimal alloy control
- H4 class in 1.6mm diameter
- Full out-of-position capability with high deposition rates
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric Outershield 81Ni1 HSR FluxCored Mig Wire
Lincoln Electric Outersheild 81Ni1-HSR FluxCored Mig Wire
- All position gas shielded 1% Ni flux cored wire, offshore and similar applications
- Superior weldability, low spatter, good bead appearance
- Exceptional mechanical properties (CVN >47J at -50°C)
- Superior product consistency with optimal alloy control
- Specific design for stress relieved applications, guaranteed impact properties after PWHT
- Meets NACE MR-0175 requirements
-
MIG Welding, Mig Torches
Linc Gun LGS 150 G – K10429-15-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.6-1.0mm
-
MIG Welding, Mig Torches
Linc Gun LGS 250 G – K10429-25-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-1.2mm
-
Mig Torches, MIG Welding
Linc Gun LGS 360 G – K10429-36-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-1.6mm
-
MIG Welding, Mig Torches
LINC GUN LGS 505 W – K10429-505-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-Shielded
Wire Diameter Range
0.8-2.4mm
-
MIG Welding, Mig Torches
LINC GUN LGS 505 W – K10429-505-3M, -4M, -5M
Top Features
- High quality rugged product built to Lincoln standards
- Ergonomic hand grip for comfortable welding day in day out
- Flexible “Ball Joint” for comfortable welding in any position
- Retractable pins for a consistently reliable connection provided as standard
- Wearing parts following the industry standard CE IEC 60974-7 and EN50078
Processes
MIG, Flux-Cored Gas-ShieldedWire Diameter Range
0.8-2.4mm
-
MIG Welding, Mig Machines, Lincoln Mig Welders
Lincoln FLEXTEC® 350X (STANDARD MODEL)
A RUGGED MULTI-PROCESS POWER SOURCE FOR MAXIMUM FLEXIBILITY
Out on the construction jobsite or in most fabrication shops, it pays to keep it simple. The Flextec 350X multi-process welder is designed for that kind of environment. These multi-process welders are easy to setup and easy to operate, yet rugged and flexible enough to be used in construction, fabrication, shipbuilding and other heavy-duty applications.
Simple
- Streamlined operator panel minimizes setup time
- Plug in to any 380-600V 3 phase power
- Easy process selection
Reliable
- Built on industry proven design elements of other popular Lincoln Electric welders
- Components designed to run cool for long life in high temperature environments
- Fully encapsulated and environmentally protected electronics
- Engineered for outdoor use and harsh environments (IP23 rated)
Flexible
- Compatible with across-the-arc, analog, digital or CrossLinc™ feeders
- Premium multi-process arc characteristics works with all DC wire, stick and TIG processes
- Choice of models to fit any application and budget
- Lightweight and portable
Product Highlights
- Desert Duty Rated™ for extreme temperatures up to 55°C
- VRD® Voltage Reduction Device reduces Open Circuit Voltage for added safety
- Offered in 4 and 6 pack rack configurations
- Wide 5-425 amperage range
- Capable of Arc Gouging with 3/16 in. (4.8 mm) carbons
CrossLinc™ Technology
- Full functionality without control cables
- Enables remote procedure setting at the feeder to improve weld quality
- Increase arc time with fewer trips to the power source to adjust settings
- Improves safety by reducing jobsite clutter
CROSSLINC™ TECHNOLOGY: SOLVING SITE WELDING ISSUES
Worker safety, weld quality, productivity and equipment reliability come to mind when welding on site or on large structures. In these environments, it is typical for the operator to work closely with a rugged, compact and lightweight wire feeder, connected to a weather-resistant power source hundreds of feet away. Until now, portable wire feeders have been available in two configurations: basic ‘across-the-arc’ models or portable feeders equipped with an added control cable.
‘Across-the-arc’ models are powered by the weld cable. This configuration provides benefits of fewer cables running back to the power source, but voltage control at the point-of-use is
not possible.The addition of a control cable to the system allows the operator to adjust voltage at the point-of-use, but these cables can be costly and add additional complexity to the production environment.
There has to be a better way.
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric LNM 316LSi Stainless Steel Mig Wire
Lincoln Electric LNM316Lsi Stainless Steel Mig Wire
• The higher Si level results in a smooth weld bead shape andeven appearance with excellent toe blending particularly infillet welds.
• The weld metal has a high resistance to pitting and crevice corrosion by non-oxidising acids.
• Used for applications with service temperatures <400°C -
Mig Wires, MIG Welding, Mig Wire
Lincoln Electric LNM 304LSi Stainless Steel Mig Wire
AWS: ER308LSI
Top Features
- Solid wire with extra low carbon for welding austenitic CrNi-steels
- With increased silicon for improved wettability
Welding Positions
AllShielding Gas
- M11: Mixed gas Ar+ 0.5-5% CO2 + 0,5-5%H2
- M12: Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric LNM307 Stainless Steel Mig Wire
AWS: ER307*
Top Features
- Solid wire for welding austenitic and ferritic stainless steels with difficult weldability
- Often used as a buffer layer for hardfacing applications
Typical Applications
- Buffer layer in hardfacing applications
Welding Positions
AllShielding Gas
- M12: Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
-
Mig Wire, Mig Wires, MIG Welding
Lincoln Electric LNM 309LSI Stainless Mig Wire
AWS: ER 309LSI
Top Features
- Solid wire for welding stainless steel to carbon steel
- With high silicon for improved wettability
Typical Applications
- For welding stainless steel to carbon steel
Welding Positions
AllShielding Gas
- Mixed gas Ar+ >0.5-5% CO2
- M13: Mixed gas Ar+ >0.5-3% O2
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric Outershield 71E-H FluxCored Mig Wire
Lincoln Electric Outersheild 71E-H FluxCored Mig Wire
- DualSheid Wire, FluxCored & Sheilding Gas
- Rutile flux cored wire for high quality welding with M21 gas
- Excellent operator appeal due to superior welding characteristics
- Superior product consistency with optimal alloy control
- H4 class in 1.6mm diameter
- Full out-of-position capability with high deposition rates
-
MIG Welding, Mig Wire, Mig Wires
Lincoln Electric Outershield 81Ni1 HSR FluxCored Mig Wire
Lincoln Electric Outersheild 81Ni1-HSR FluxCored Mig Wire
- All position gas shielded 1% Ni flux cored wire, offshore and similar applications
- Superior weldability, low spatter, good bead appearance
- Exceptional mechanical properties (CVN >47J at -50°C)
- Superior product consistency with optimal alloy control
- Specific design for stress relieved applications, guaranteed impact properties after PWHT
- Meets NACE MR-0175 requirements