Tube Cutting & Facing
Showing 16–24 of 24 results
-
Tube Cutting & Facing
Axxair DC115-BMx
Technical characteristics
– Big range: Ø12 to Ø115 mm through concentric clamping on the full diameter range
– Burr-free tube squaring and bevelling machine
– thickness < 3mm (according to material)
– Ideal tool to face a band saw cut before automatic welding
– Accurate manual advance: 0.1 mm step graduation 4/1000 inches
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside bevel possible with optional tool holder
– Squaring and bevelling in one operation
– Possibility to use two tools simultaneously
– Minimal straight length of the tube: 58 mm
– Delivered in wooden box
– Weight: 37 kg / 82 lbs
– Motor 1100W with large speed range (2 gear)
– Worm and gear transmission for optimal speed rangeSKU: n/a -
Tube Cutting & Facing
Axxair DC221-AMx
Technical characteristics
– Burr-free tube squaring and edge breaking machine used after a band saw cut or on electropolished tubes
– Thickness < 0,12 inches (3 mm) according to material
– Ideal tool to face a band saw cut before automatic welding
– Accurate manual advance: 4/1000 (0,1 mm) step graduation
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside edge breaking possible with optional tool holder
– Squaring and edge breaking in one operation
– Possibility to use three tools simultaneously
– Minimal straight length of the tube: 1,54 inches (39 mm)
– Delivered in high quality protection case
– Light and compact: 46 lbs. (21 kg)
– Motor 1100W with large speed range (2 gears)
– Screw and wheel drive to optimize the speed range and eliminate vibrationsSKU: n/a -
Tube Cutting & Facing
Axxair DC221-BMx
Technical characteristics
– Burr-free tube squaring and edge breaking machine used after a band saw cut or on electropolished tubes
– Thickness < 0,12 inches (3 mm) according to material
– Wide range of use with concentric clamping for all diameters
– Ideal tool to face a tube before automatic welding
– Accurate manual advance: 4/1000 (0,1 mm) step graduation
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside bevel possible with optional tool holder
– Squaring and beveling in one operation
– Possibility to use three tools simultaneously
– Minimal straight length of the tube: 2,44 inches (62 mm)
– Delivered in high quality protection case
– Weight: 121 lbs. (55 kg) – Motor 1100W with large speed range (2 gears)
– Screw and wheel drive to optimize the speed range and eliminate vibrationsSKU: n/a -
Pipe Fit-Up Tools, Tube Cutting & Facing, Axxair Orbital Welding
Axxair DC25-MA Battery Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– New brushless motor 18V
– Accurate manual advance, gratuated vernier scale
– Light and compact (2.5 kg)
– Come with two 18V Li-Power, 5.2 Ah batteries and a fast battery charger
– 2 mechanical speeds + electric speed variator
– Clamping shells : stainless steel jaws with spring (Priced Separately per Diameter)SKU: n/a -
Pipe Fit-Up Tools, Tube Cutting & Facing
Axxair DC25-MS Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– Mains motor 1100 W
– 220-240 V ~50/60Hz or 120 V ~ 50/60Hz
– Accurate manual advance, gratuated vernier scale
– Light and compact (2.5 kg)
– Two speed gearbox with variable speed drive
– High quality speed controller
– Clamping shells : stainless steel jaws with spring (Priced Separately per Diameter)SKU: n/a -
Pipe Fit-Up Tools, Tube Cutting & Facing
Axxair DC65-MA Battery Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– New brushless motor 18V
– Accurate manual advance, gratuated vernier scale
– Light and compact (5.5 kg)
– Come with two 18V Li-Power, 5.2 Ah batteries and a fast battery charger
– 2 mechanical speeds + electric speed variator
– Clamping shells : stainless steel jaws with spring (priced separately per diameter)SKU: n/a -
Tube Cutting & Facing, Pipe Fit-Up Tools
Axxair DC65-MS Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– Mains motor 1100 W Metabo Drive
– 220-240 V ~50/60Hz or 120 V ~ 50/60Hz
– Accurate manual advance, graduated vernier scale
– Light and compact (5.5 kg)
– Two speed gearbox with variable speed drive
– High quality speed controller
– Clamping shells : stainless steel jaws with spring (priced separately per Diameter)SKU: n/a -
High Purity Equipment, Tube Cutting & Facing, Axxair Orbital Welding
Axxair SAXX 200 Orbital Inverter Power Supply
- Now only available on the Metron Hire Fleet, replaced by SAXX-201
- SAXX-200 Orbital TIG Power Source for Orbital Fusion Welding Heads
- 7.5″ Color Touch Screen Interface
- 110V to 230V
This Axxair Orbital Inverter power supply features a 7.5″ color touch screen and auto-calculated program settings based on diameter, thickness, configuration and material.
-
- 200A maximum current, 120A 100% (230V)
- 140A maximum current, 100A 100% (110V)
- Auto line, 110V to 230V +/- 15% (mono – 50/60hz)
- 7.5″ color touch screen interface
- Auto calculation for program setting through diameter, thickness, configuration and material
- Programs from 1 to 20 levels
- Step modes advance speed-wire pulse
- Dual gas control: purge gas (through purge time, as well as electrode gas, through pre-gas, or ppm
levels)
- Compatible with oxygen measuring systems
- USB program storage: 200 programs per stick
SKU: n/a -
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.
SKU: n/a
-
Tube Cutting & Facing
Axxair DC115-BMx
Technical characteristics
– Big range: Ø12 to Ø115 mm through concentric clamping on the full diameter range
– Burr-free tube squaring and bevelling machine
– thickness < 3mm (according to material)
– Ideal tool to face a band saw cut before automatic welding
– Accurate manual advance: 0.1 mm step graduation 4/1000 inches
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside bevel possible with optional tool holder
– Squaring and bevelling in one operation
– Possibility to use two tools simultaneously
– Minimal straight length of the tube: 58 mm
– Delivered in wooden box
– Weight: 37 kg / 82 lbs
– Motor 1100W with large speed range (2 gear)
– Worm and gear transmission for optimal speed range -
Tube Cutting & Facing
Axxair DC221-AMx
Technical characteristics
– Burr-free tube squaring and edge breaking machine used after a band saw cut or on electropolished tubes
– Thickness < 0,12 inches (3 mm) according to material
– Ideal tool to face a band saw cut before automatic welding
– Accurate manual advance: 4/1000 (0,1 mm) step graduation
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside edge breaking possible with optional tool holder
– Squaring and edge breaking in one operation
– Possibility to use three tools simultaneously
– Minimal straight length of the tube: 1,54 inches (39 mm)
– Delivered in high quality protection case
– Light and compact: 46 lbs. (21 kg)
– Motor 1100W with large speed range (2 gears)
– Screw and wheel drive to optimize the speed range and eliminate vibrations -
Tube Cutting & Facing
Axxair DC221-BMx
Technical characteristics
– Burr-free tube squaring and edge breaking machine used after a band saw cut or on electropolished tubes
– Thickness < 0,12 inches (3 mm) according to material
– Wide range of use with concentric clamping for all diameters
– Ideal tool to face a tube before automatic welding
– Accurate manual advance: 4/1000 (0,1 mm) step graduation
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside bevel possible with optional tool holder
– Squaring and beveling in one operation
– Possibility to use three tools simultaneously
– Minimal straight length of the tube: 2,44 inches (62 mm)
– Delivered in high quality protection case
– Weight: 121 lbs. (55 kg) – Motor 1100W with large speed range (2 gears)
– Screw and wheel drive to optimize the speed range and eliminate vibrations -
Pipe Fit-Up Tools, Tube Cutting & Facing, Axxair Orbital Welding
Axxair DC25-MA Battery Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– New brushless motor 18V
– Accurate manual advance, gratuated vernier scale
– Light and compact (2.5 kg)
– Come with two 18V Li-Power, 5.2 Ah batteries and a fast battery charger
– 2 mechanical speeds + electric speed variator
– Clamping shells : stainless steel jaws with spring (Priced Separately per Diameter) -
Pipe Fit-Up Tools, Tube Cutting & Facing
Axxair DC25-MS Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– Mains motor 1100 W
– 220-240 V ~50/60Hz or 120 V ~ 50/60Hz
– Accurate manual advance, gratuated vernier scale
– Light and compact (2.5 kg)
– Two speed gearbox with variable speed drive
– High quality speed controller
– Clamping shells : stainless steel jaws with spring (Priced Separately per Diameter) -
Pipe Fit-Up Tools, Tube Cutting & Facing
Axxair DC65-MA Battery Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– New brushless motor 18V
– Accurate manual advance, gratuated vernier scale
– Light and compact (5.5 kg)
– Come with two 18V Li-Power, 5.2 Ah batteries and a fast battery charger
– 2 mechanical speeds + electric speed variator
– Clamping shells : stainless steel jaws with spring (priced separately per diameter) -
Tube Cutting & Facing, Pipe Fit-Up Tools
Axxair DC65-MS Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– Mains motor 1100 W Metabo Drive
– 220-240 V ~50/60Hz or 120 V ~ 50/60Hz
– Accurate manual advance, graduated vernier scale
– Light and compact (5.5 kg)
– Two speed gearbox with variable speed drive
– High quality speed controller
– Clamping shells : stainless steel jaws with spring (priced separately per Diameter) -
High Purity Equipment, Tube Cutting & Facing, Axxair Orbital Welding
Axxair SAXX 200 Orbital Inverter Power Supply
- Now only available on the Metron Hire Fleet, replaced by SAXX-201
- SAXX-200 Orbital TIG Power Source for Orbital Fusion Welding Heads
- 7.5″ Color Touch Screen Interface
- 110V to 230V
This Axxair Orbital Inverter power supply features a 7.5″ color touch screen and auto-calculated program settings based on diameter, thickness, configuration and material.
-
- 200A maximum current, 120A 100% (230V)
- 140A maximum current, 100A 100% (110V)
- Auto line, 110V to 230V +/- 15% (mono – 50/60hz)
- 7.5″ color touch screen interface
- Auto calculation for program setting through diameter, thickness, configuration and material
- Programs from 1 to 20 levels
- Step modes advance speed-wire pulse
- Dual gas control: purge gas (through purge time, as well as electrode gas, through pre-gas, or ppm
levels)
- Compatible with oxygen measuring systems
- USB program storage: 200 programs per stick
-
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.
-
Tube Cutting & Facing
Axxair DC115-BMx
Technical characteristics
– Big range: Ø12 to Ø115 mm through concentric clamping on the full diameter range
– Burr-free tube squaring and bevelling machine
– thickness < 3mm (according to material)
– Ideal tool to face a band saw cut before automatic welding
– Accurate manual advance: 0.1 mm step graduation 4/1000 inches
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside bevel possible with optional tool holder
– Squaring and bevelling in one operation
– Possibility to use two tools simultaneously
– Minimal straight length of the tube: 58 mm
– Delivered in wooden box
– Weight: 37 kg / 82 lbs
– Motor 1100W with large speed range (2 gear)
– Worm and gear transmission for optimal speed range -
Tube Cutting & Facing
Axxair DC221-AMx
Technical characteristics
– Burr-free tube squaring and edge breaking machine used after a band saw cut or on electropolished tubes
– Thickness < 0,12 inches (3 mm) according to material
– Ideal tool to face a band saw cut before automatic welding
– Accurate manual advance: 4/1000 (0,1 mm) step graduation
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside edge breaking possible with optional tool holder
– Squaring and edge breaking in one operation
– Possibility to use three tools simultaneously
– Minimal straight length of the tube: 1,54 inches (39 mm)
– Delivered in high quality protection case
– Light and compact: 46 lbs. (21 kg)
– Motor 1100W with large speed range (2 gears)
– Screw and wheel drive to optimize the speed range and eliminate vibrations -
Tube Cutting & Facing
Axxair DC221-BMx
Technical characteristics
– Burr-free tube squaring and edge breaking machine used after a band saw cut or on electropolished tubes
– Thickness < 0,12 inches (3 mm) according to material
– Wide range of use with concentric clamping for all diameters
– Ideal tool to face a tube before automatic welding
– Accurate manual advance: 4/1000 (0,1 mm) step graduation
– Sliding adjustment of tool holder offers easy diameter change and optimal tip wearing
– 30° and 45° outside bevel possible with optional tool holder
– Squaring and beveling in one operation
– Possibility to use three tools simultaneously
– Minimal straight length of the tube: 2,44 inches (62 mm)
– Delivered in high quality protection case
– Weight: 121 lbs. (55 kg) – Motor 1100W with large speed range (2 gears)
– Screw and wheel drive to optimize the speed range and eliminate vibrations -
Pipe Fit-Up Tools, Tube Cutting & Facing, Axxair Orbital Welding
Axxair DC25-MA Battery Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– New brushless motor 18V
– Accurate manual advance, gratuated vernier scale
– Light and compact (2.5 kg)
– Come with two 18V Li-Power, 5.2 Ah batteries and a fast battery charger
– 2 mechanical speeds + electric speed variator
– Clamping shells : stainless steel jaws with spring (Priced Separately per Diameter) -
Pipe Fit-Up Tools, Tube Cutting & Facing
Axxair DC25-MS Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– Mains motor 1100 W
– 220-240 V ~50/60Hz or 120 V ~ 50/60Hz
– Accurate manual advance, gratuated vernier scale
– Light and compact (2.5 kg)
– Two speed gearbox with variable speed drive
– High quality speed controller
– Clamping shells : stainless steel jaws with spring (Priced Separately per Diameter) -
Pipe Fit-Up Tools, Tube Cutting & Facing
Axxair DC65-MA Battery Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– New brushless motor 18V
– Accurate manual advance, gratuated vernier scale
– Light and compact (5.5 kg)
– Come with two 18V Li-Power, 5.2 Ah batteries and a fast battery charger
– 2 mechanical speeds + electric speed variator
– Clamping shells : stainless steel jaws with spring (priced separately per diameter) -
Tube Cutting & Facing, Pipe Fit-Up Tools
Axxair DC65-MS Tube Facing Machine
Technical characteristics
– Burr-free tube squaring machine
– Mains motor 1100 W Metabo Drive
– 220-240 V ~50/60Hz or 120 V ~ 50/60Hz
– Accurate manual advance, graduated vernier scale
– Light and compact (5.5 kg)
– Two speed gearbox with variable speed drive
– High quality speed controller
– Clamping shells : stainless steel jaws with spring (priced separately per Diameter) -
High Purity Equipment, Tube Cutting & Facing, Axxair Orbital Welding
Axxair SAXX 200 Orbital Inverter Power Supply
- Now only available on the Metron Hire Fleet, replaced by SAXX-201
- SAXX-200 Orbital TIG Power Source for Orbital Fusion Welding Heads
- 7.5″ Color Touch Screen Interface
- 110V to 230V
This Axxair Orbital Inverter power supply features a 7.5″ color touch screen and auto-calculated program settings based on diameter, thickness, configuration and material.
-
- 200A maximum current, 120A 100% (230V)
- 140A maximum current, 100A 100% (110V)
- Auto line, 110V to 230V +/- 15% (mono – 50/60hz)
- 7.5″ color touch screen interface
- Auto calculation for program setting through diameter, thickness, configuration and material
- Programs from 1 to 20 levels
- Step modes advance speed-wire pulse
- Dual gas control: purge gas (through purge time, as well as electrode gas, through pre-gas, or ppm
levels)
- Compatible with oxygen measuring systems
- USB program storage: 200 programs per stick
-
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.