Tri Tool Inc
Showing all 9 results
-
Uncategorised
MODEL 302 TUBE SQUARING MACHINE
Tri Tool set out to produce the perfect companion for automatic welding machinery. Our engineers asked high purity tube welding specialists what features they desired most in a squaring machine. Here’s what they said:
- They wanted to match size ranges and clearances with automatic weld heads.
- They wanted to do both tube and fittings with one machine.
The customers spoke and – our designers listened. The end result is the Model 302. After extensive field testing and customer feedback, there’s no question why the Model 302 Tube Squaring Machineis machine has been received with so much enthusiasm.
Combining the most desirable features for rapid precision autogenous tube welding, the 302’s size configuration and capabilities have been optimized for reliability and ease of use. Feature packed, and built Tri Tool tough, the Model 302 provides the constant precision and time savings our customers have learned they can depend on. Most importantly, you get the accurate, repeatable weld prep results your work demands. Cut it right the first time, every time with the innovative Model 302.
Whether bench mount or portable, no tools are required for operation and straight tube or micro fittings with OD’s of 0.1875″ (4.76mm) to 2.375″ (60.3mm) can be squared with ease. The versatile Model 302 has proven to be a perfect platform for special configuration machines. Due to its heavy duty construction, the 302 can be fitted with air clamping systems. The rugged cast body can be set up for left-hand or right-hand operation. Stainless steel clamping saddles are standard and provide durability and prevent carbon contamination for high purity tubing systems. Find out why the Model 302 is your best choice for automatic tube welding preparation.
SKU: n/a -
Uncategorised
MODEL 304 TUBE SQUARING MACHINE
Popular for its broad size range, precise burr-free preps and Clean-room safe. No damage to electropolished ID’s. Face stainless steel, inconel, and plastic tubing. Power can be supplied from pneumatic or electric drive for cleanroom applications. When you see how rugged and precise the Model 304 is, you’ll understand why it’s relied upon for larger tube squaring by so many shops, in so many industries.
With an integral, clear chip guard designed to provide increase operator safety, the Model 304 uses full support OD clamping saddles or collets for holding the tubing with minimal distortion. A precise easy feed system is combined with a dual range, variable speed electric drive to provide optimum RPM and maximum operator control. The cutting head accepts squaring bits alone or in combination with beveling and ID deburring bits for complex preps.
SKU: n/a -
Uncategorised
MODEL 308 PORTABLE TUBE SQUARING MACHINE
The largest of our 300 Series tube squaring machines, the Model 308 delivers superior accuracy when working on larger diameter thinwall tubing. Like the smaller 300 Series machines, the Model 308 tube squarer is easy to setup, operate and consistently delivers perfectly square, burr free end preps to satisfy your most exacting requirements for precision welds.
SKU: n/a -
Uncategorised
Model 550 CTC – Chipless Tube Cutting System
The Model 550 Chipless Tube Cutting System is a compact machine tool for rapidly and reliably severing tubes. This system is flight required hardware for many tactical US military aircraft and is used in civilian flight system maintenance roles as well.
SKU: n/a -
Uncategorised
MODEL 5712AC SEVERMASTER
High production with consistent repeatable performance
High production with consistent repeatable performance over and over again, our model 5712AC delivers a weld-ready finish on large tube and thin wall pipe.
The perfect weld prep
- The variable speed motor increases tool bit life and reduces burrs
- Smooth roller bearing design for perfect severs
- Four interchangeable, self-centering collets prevent distortion of thin wall tubing
- The unique hybrid saddle and collet system, accept torque while providing reliable, secure clamping
SKU: n/a -
Uncategorised
MODEL 5716AC SEVERMASTER
High production with consistent repeatable performance
High production with consistent repeatable performance over and over again, our model 5716AC and 5712AC deliver a weld-ready finish on large tube and thin wall pipe.
The perfect weld prep
- The variable speed motor increases tool bit life and reduces burrs
- Smooth roller bearing design for perfect severs
- Four interchangeable, self-centering collets prevent distortion of thin wall tubing
- The unique hybrid saddle and collet system, accept torque while providing reliable, secure clamping
SKU: n/a -
High Purity Equipment, Tube Severing
MODEL 572AC SEVERMASTER
Tube Severing Machine
The Model 572AC SEVERMASTER™ severs .25” to 2″ (6.4 to 50.8mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes.
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-1AC Tube Squaring Module for optimum burr free ends.
SKU: n/a -
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.
SKU: n/a
-
Uncategorised
MODEL 302 TUBE SQUARING MACHINE
Tri Tool set out to produce the perfect companion for automatic welding machinery. Our engineers asked high purity tube welding specialists what features they desired most in a squaring machine. Here’s what they said:
- They wanted to match size ranges and clearances with automatic weld heads.
- They wanted to do both tube and fittings with one machine.
The customers spoke and – our designers listened. The end result is the Model 302. After extensive field testing and customer feedback, there’s no question why the Model 302 Tube Squaring Machineis machine has been received with so much enthusiasm.
Combining the most desirable features for rapid precision autogenous tube welding, the 302’s size configuration and capabilities have been optimized for reliability and ease of use. Feature packed, and built Tri Tool tough, the Model 302 provides the constant precision and time savings our customers have learned they can depend on. Most importantly, you get the accurate, repeatable weld prep results your work demands. Cut it right the first time, every time with the innovative Model 302.
Whether bench mount or portable, no tools are required for operation and straight tube or micro fittings with OD’s of 0.1875″ (4.76mm) to 2.375″ (60.3mm) can be squared with ease. The versatile Model 302 has proven to be a perfect platform for special configuration machines. Due to its heavy duty construction, the 302 can be fitted with air clamping systems. The rugged cast body can be set up for left-hand or right-hand operation. Stainless steel clamping saddles are standard and provide durability and prevent carbon contamination for high purity tubing systems. Find out why the Model 302 is your best choice for automatic tube welding preparation.
-
Uncategorised
MODEL 304 TUBE SQUARING MACHINE
Popular for its broad size range, precise burr-free preps and Clean-room safe. No damage to electropolished ID’s. Face stainless steel, inconel, and plastic tubing. Power can be supplied from pneumatic or electric drive for cleanroom applications. When you see how rugged and precise the Model 304 is, you’ll understand why it’s relied upon for larger tube squaring by so many shops, in so many industries.
With an integral, clear chip guard designed to provide increase operator safety, the Model 304 uses full support OD clamping saddles or collets for holding the tubing with minimal distortion. A precise easy feed system is combined with a dual range, variable speed electric drive to provide optimum RPM and maximum operator control. The cutting head accepts squaring bits alone or in combination with beveling and ID deburring bits for complex preps.
-
Uncategorised
MODEL 308 PORTABLE TUBE SQUARING MACHINE
The largest of our 300 Series tube squaring machines, the Model 308 delivers superior accuracy when working on larger diameter thinwall tubing. Like the smaller 300 Series machines, the Model 308 tube squarer is easy to setup, operate and consistently delivers perfectly square, burr free end preps to satisfy your most exacting requirements for precision welds.
-
Uncategorised
Model 550 CTC – Chipless Tube Cutting System
The Model 550 Chipless Tube Cutting System is a compact machine tool for rapidly and reliably severing tubes. This system is flight required hardware for many tactical US military aircraft and is used in civilian flight system maintenance roles as well.
-
Uncategorised
MODEL 5712AC SEVERMASTER
High production with consistent repeatable performance
High production with consistent repeatable performance over and over again, our model 5712AC delivers a weld-ready finish on large tube and thin wall pipe.
The perfect weld prep
- The variable speed motor increases tool bit life and reduces burrs
- Smooth roller bearing design for perfect severs
- Four interchangeable, self-centering collets prevent distortion of thin wall tubing
- The unique hybrid saddle and collet system, accept torque while providing reliable, secure clamping
-
Uncategorised
MODEL 5716AC SEVERMASTER
High production with consistent repeatable performance
High production with consistent repeatable performance over and over again, our model 5716AC and 5712AC deliver a weld-ready finish on large tube and thin wall pipe.
The perfect weld prep
- The variable speed motor increases tool bit life and reduces burrs
- Smooth roller bearing design for perfect severs
- Four interchangeable, self-centering collets prevent distortion of thin wall tubing
- The unique hybrid saddle and collet system, accept torque while providing reliable, secure clamping
-
High Purity Equipment, Tube Severing
MODEL 572AC SEVERMASTER
Tube Severing Machine
The Model 572AC SEVERMASTER™ severs .25” to 2″ (6.4 to 50.8mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes.
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-1AC Tube Squaring Module for optimum burr free ends.
-
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.
-
Uncategorised
MODEL 302 TUBE SQUARING MACHINE
Tri Tool set out to produce the perfect companion for automatic welding machinery. Our engineers asked high purity tube welding specialists what features they desired most in a squaring machine. Here’s what they said:
- They wanted to match size ranges and clearances with automatic weld heads.
- They wanted to do both tube and fittings with one machine.
The customers spoke and – our designers listened. The end result is the Model 302. After extensive field testing and customer feedback, there’s no question why the Model 302 Tube Squaring Machineis machine has been received with so much enthusiasm.
Combining the most desirable features for rapid precision autogenous tube welding, the 302’s size configuration and capabilities have been optimized for reliability and ease of use. Feature packed, and built Tri Tool tough, the Model 302 provides the constant precision and time savings our customers have learned they can depend on. Most importantly, you get the accurate, repeatable weld prep results your work demands. Cut it right the first time, every time with the innovative Model 302.
Whether bench mount or portable, no tools are required for operation and straight tube or micro fittings with OD’s of 0.1875″ (4.76mm) to 2.375″ (60.3mm) can be squared with ease. The versatile Model 302 has proven to be a perfect platform for special configuration machines. Due to its heavy duty construction, the 302 can be fitted with air clamping systems. The rugged cast body can be set up for left-hand or right-hand operation. Stainless steel clamping saddles are standard and provide durability and prevent carbon contamination for high purity tubing systems. Find out why the Model 302 is your best choice for automatic tube welding preparation.
-
Uncategorised
MODEL 304 TUBE SQUARING MACHINE
Popular for its broad size range, precise burr-free preps and Clean-room safe. No damage to electropolished ID’s. Face stainless steel, inconel, and plastic tubing. Power can be supplied from pneumatic or electric drive for cleanroom applications. When you see how rugged and precise the Model 304 is, you’ll understand why it’s relied upon for larger tube squaring by so many shops, in so many industries.
With an integral, clear chip guard designed to provide increase operator safety, the Model 304 uses full support OD clamping saddles or collets for holding the tubing with minimal distortion. A precise easy feed system is combined with a dual range, variable speed electric drive to provide optimum RPM and maximum operator control. The cutting head accepts squaring bits alone or in combination with beveling and ID deburring bits for complex preps.
-
Uncategorised
MODEL 308 PORTABLE TUBE SQUARING MACHINE
The largest of our 300 Series tube squaring machines, the Model 308 delivers superior accuracy when working on larger diameter thinwall tubing. Like the smaller 300 Series machines, the Model 308 tube squarer is easy to setup, operate and consistently delivers perfectly square, burr free end preps to satisfy your most exacting requirements for precision welds.
-
Uncategorised
Model 550 CTC – Chipless Tube Cutting System
The Model 550 Chipless Tube Cutting System is a compact machine tool for rapidly and reliably severing tubes. This system is flight required hardware for many tactical US military aircraft and is used in civilian flight system maintenance roles as well.
-
Uncategorised
MODEL 5712AC SEVERMASTER
High production with consistent repeatable performance
High production with consistent repeatable performance over and over again, our model 5712AC delivers a weld-ready finish on large tube and thin wall pipe.
The perfect weld prep
- The variable speed motor increases tool bit life and reduces burrs
- Smooth roller bearing design for perfect severs
- Four interchangeable, self-centering collets prevent distortion of thin wall tubing
- The unique hybrid saddle and collet system, accept torque while providing reliable, secure clamping
-
Uncategorised
MODEL 5716AC SEVERMASTER
High production with consistent repeatable performance
High production with consistent repeatable performance over and over again, our model 5716AC and 5712AC deliver a weld-ready finish on large tube and thin wall pipe.
The perfect weld prep
- The variable speed motor increases tool bit life and reduces burrs
- Smooth roller bearing design for perfect severs
- Four interchangeable, self-centering collets prevent distortion of thin wall tubing
- The unique hybrid saddle and collet system, accept torque while providing reliable, secure clamping
-
High Purity Equipment, Tube Severing
MODEL 572AC SEVERMASTER
Tube Severing Machine
The Model 572AC SEVERMASTER™ severs .25” to 2″ (6.4 to 50.8mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes.
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-1AC Tube Squaring Module for optimum burr free ends.
-
Tube Cutting & Facing, Tube Severing
MODEL 576AC SEVERMASTER
Tube Severing Machine
The Model 576AC SEVERMASTER™ severs 2.0” to 6.63″ (50.8 to 168.4mm) diameter tubes and thin wall pipe. This machine enhances productivity by incorporation of the auto-cycle tool model and quick lock collet closure. A cam cycle tool bit feed mechanism, with adjustable depth of feed from .001” to .005” (.02 to .13mm), automatically returns the tool bit to the home position ready to start the next cut. The feed increment per revolution is adjustable to optimize the cutting speed relative to the material. The tool module also allows setting the start and finish cut positions to minimize the cycle time. A variable speed motor provides further cutting speed control for increased tool bit life and ID burr reduction. The quick lock mechanism actuates the collet with a single lever stroke for simple collet changes. The Model 576AC has a collet clamping length of 3.00” (76.2mm).
Tool bit options are available to minimize the burr on the mounting side or the drop-off side of the sever line and in different edge widths to match the tube wall thickness. The tool also incorporates mounting features to allow use of an SQM-2AC Tube Squaring Module for optimum burr free ends.