HFT PurgEye® 200 IP65 Rechargeable Weld Purge Monitor®
Accurately measuring down to 10 ppm
Now with an OLED (organic light emitting diode) display, the PurgEye ® 200 Weld Purge Monitor ® gives sharper, brighter and clearer readings for viewing at longer distances than before. The OLED display is mainly symbol based, which means the menus are easily understandable regardless of which languages the user speaks.
Main Features:
• Internal electro-mechanical pump with 1 l/m flow rate.
• USB lead included to control PurgeLog™ software.
• IP65 rated.
• Long life, faster response sensor.
• Internal rechargeable battery or mains power operated.
• Battery life up to 10 hours.
• Hand held easy to use instrument.
• Warning alarm levels between 1 and 999 ppm.
• Flow detection for accurate reading of gas samples.
• Outstanding protection against HF interference.
• Large character OLED screen for easy reading.
• Power on / off with standby button for sensor warm up.
• Can be charged by plugging directly into mains power with charging lead or optional charging dock.
€2,535,00 Excluding VAT
-
High Purity Equipment
HFT PurgEye® 200 IP65 Rechargeable Weld Purge Monitor®
€2,535,00 Excluding VAT
The handy PurgEye ® 200 is battery or mains power driven, with charging carried out from a dock (optional). Battery life is up to 10 hours.
This latest model has a much faster response, long life sensor.
It also has loud, pre-settable audio alarms for rising or falling oxygen levels between 1 and 999 ppm as well as alarm + and – buttons for displaying threshold oxygen settings,
In addition, there is an alarm mute as well as flow detection for accurate reading of gas samples.
The PurgEye ® 200 also comes complete with leak tight connect / disconnect gas hose connections.
For the very first time, the PurgEye ® 200 now features PurgeNet ™, allowing the addition of standard accessories that will allow the Weld Purge Monitor ® to be linked with automatic welding machines such as orbital welders, a traffic light accessory to give visual indication of the Purge process and final a dew point meter.
As with all other HFT products, the PurgEye ® 200 Weld Purge Monitors ® are always in stock and available for immediate delivery Worldwide.
PurgEye ® 200 Weld Purge Monitors® are available for immediate delivery.
PurgEye ® is a Family Series of Weld Purge Monitors®.
Product supplied with: PurgEye 200 PPM Monitor, Charging Cradle, Input Hose c/w Filter, Output Hose, Instruction Manual, Carry Case.
Warranty 1year
Technical Data and Specification
Can be used with any tube or pipe weld purging system, any weld purging chamber or weld purging enclosure.
Accuracy range: Measuring 1000 down to 1 ppm oxygen.
Accuracy: = ± 0.002%.
Power: 90/250V single phase 50hz or 60hz A.C. supply or internal battery pack. Auto Power-Off
If the PurgEye® 200 IP65 is left with an over-range reading for more than 15 minutes, then it will automatically turn off to conserve battery power.
Warning Alarm The Warning Alarm can be set to any level between 1 and 999 ppm and has both audible and visual indication when the alarm threshold is exceeded.
Power On/ Off If the PurgEye® 200 IP65 is off, then pressing the standby button will switch it on and it will start the sensor warm-up procedure.
The PurgEye® 200 IP65 can be turned off by holding the standby button for approx. 10 seconds or until it turns off. Integral Sample Pump
The PurgEye® 200 IP65 is equipped with an internal electro-mechanical sampling pump that can be switched on and off as needed. An alert icon flashes in the event of insufficient gas flow.
Alarm Mute An alarm mute facility can be switched on and off as required. Alarm and Alarm Buttons Pressing either of the alarm buttons will display the current alarm threshold setting. When the alarm threshold is displayed, the first digit will flash, pressing either of the alarm buttons at this point will increase or decrease the value of the flashing digit.
Guaranteed Accuracy
The PurgEye® 200 IP65 Weld Purge Monitor® indicates oxygen levels from 1000 down to 1 ppm (0.0001%) accurate to 0.002% of reading
Guaranteed accuracy of oxygen indication to allow a weld start with minimal risk of oxidation.
Large Character OLED Screen The large OLED screen allows the reading to be easily read and is mainly symbol rather than text based. The OLED display does not need a backlight and can be viewed from greater angles than LED screens.
PurgeNet™ facilities:
1. Control of welding power sources such as orbital welders and any other automatic welding systems to switch on and off according to oxygen values.
2. Use of PurgeLog™ software to transfer weld purge data for quality control of welds. Notes: PurgeLog™ software provided free with instrument.
Brand
Huntingdon Fusion
Based on 0 reviews
Be the first to review “HFT PurgEye® 200 IP65 Rechargeable Weld Purge Monitor®”
You must be logged in to post a review.
There are no reviews yet.